LJAN 110v Coffee Roaster Machine Home Kitchen Tool Electric Stainless Steel#201#304Machine (Stainless Steel#304, 110v)

September 29, 2018 - Comment

Material Type:Stainless Steel#304 | Size:110v 【Features】 1, the use of stainless steel forging polished barrel thick, strong ability to hold warm, both conductive, radiation and convection to give a stable heating of coffee beans. 2, the barrel installed 2 asymmetric stainless steel low dial to eliminate dead ends, so that beans in the baking room

Buy Now! $240.00Amazon.com Price
(as of 19 April 2020 4:49 PM EDT - Details)

Material Type:Stainless Steel#304 | Size:110v
【Features】
1, the use of stainless steel forging polished barrel thick, strong ability to hold warm, both conductive, radiation and convection to give a stable heating of coffee beans.
2, the barrel installed 2 asymmetric stainless steel low dial to eliminate dead ends, so that beans in the baking room enjoy rolling. There is absolutely no copy of the yin and yang in the pan phenomenon.
3, select low-decibel drive motor, 25 rpm for one minute, the motor is running completely silent. By listening to the words of coffee beans to tell the extent of dehydration and two life-or-death burst.
4, with a convenient removable window, peas can be observed at any time the coloring and shape changes. Stainless steel tube hole-shaped section, so that the smooth discharge of smoke during the baking process, rapid cooling and the removal of soybean hulls. Clearly indicate the arrival of each baking stage.
【Parameters】
1.Material: Stainless steel
2.Power: 40W
3.Voltage: AC110V, AC220V
4.Size: 38 * 22 * 20CM
5.Weight: about 2.6kg
【Instructions】
First, install the motor: Screw the bracket fixing bolt into the screw hole at the bottom of the motor, pay attention to the height of the bearing center of the motor shaft center and the other end of the bracket.
Second, install the roller:
1. One end of the thick shaft of the roller is inserted into one end of the motor shaft and tightened the fixing bolt.
2. Place the roller bearing end into the bearing housing.
3. Overlooking the installation of the baking machine so that the motor shaft center to the roller and bearing in line.
4. Tighten the nuts that connect the motor to the bracket.

Note: This machine does not heat the function, it needs an additional electric furnace or gas furnace heating furnace.

Comments

Comments are disabled for this post.